monster beats by dr. dre studio headphones Winter Storm Jaxon Brings Snow to the Midwest And Northeast

beats by dre headphones cheap Winter Storm Jaxon Brings Snow to the Midwest And Northeast

The latest Winter Storm, Jaxon is already making its way across portions of the West Coast and the northern reaches of the Central Plains before pushing into the Midwest on Sunday and the Northeast in the early stages of next week.

The Weather Channel reports the early stages of next week will include a warming period for the eastern half of the nation and a more unsettled outlook for the West as rain and cooler temperatures are expected across the Western portion of the nation.

The unsettled weather which will be seen in the South, Midwest, and East over the weekend will give way to temperatures above average over the course of the early to middle of the week with temperatures in the 60s while the Western half of the nation will see wet weather with temperatures below average. is the ongoing Winter Storm Jaxon which will spend much of Saturday over the inland areas of the West before heading into the Central Plains on Sunday.

A band of rain and snow is currently in place from Tuscon, Arizona to Rapid City as temperatures will remain in the mid 30s across the Dakota’s and Utah throughout Saturday. from Central Texas through Illinois and onward into the state of New York.

The risk of thunderstorms will remain high on Sunday for areas of Central Texas into Louisiana and Arkansas.

The effects of Winter Storm Jaxon will be felt across much of the Northeast on Monday into Tuesday as rising temperatures will be accompanied by up to one inch of rainfall in areas where a heavy thaw of snow and ice will begin to thaw and increase the risk of flooding.

Accuweather reports the heavy rainfall will cover a region from the Carolinas in the South to New England where streams and rivers have already risen to higher levels than appear on average.

Early next week, temperatures will rise to the 50s and 60s for most in the East while the West will see a small cooldown with the Pacific Northwest expecting rain through the majority of the week and temperatures in the mid 40s; as far south as Southern California the temperature is expected to dip into the 50s and 60s for much of the week after last week saw rising temperatures reach the 70s and 80s in Los Angeles and the surrounding areas.

The low pressure moving into the West at the start of the week will move across the nation with snow and freezing temperatures once again expected for the Midwest and rain in the South by Thursday of next week.

The Weather Channel reports the early stages of next week will include a warming period for the eastern half of the nation and a more unsettled outlook for the West as rain and cooler temperatures are expected across the Western portion of the nation.

The unsettled weather which will be seen in the South, Midwest, and East over the weekend will give way to temperatures above average over the course of the early to middle of the week with temperatures in the 60s while the Western half of the nation will see wet weather with temperatures below average. is the ongoing Winter Storm Jaxon which will spend much of Saturday over the inland areas of the West before heading into the Central Plains on Sunday.

A band of rain and snow is currently in place from Tuscon, Arizona to Rapid City as temperatures will remain in the mid 30s across the Dakota’s and Utah throughout Saturday. from Central Texas through Illinois and onward into the state of New York.

The risk of thunderstorms will remain high on Sunday for areas of Central Texas into Louisiana and Arkansas.

The effects of Winter Storm Jaxon will be felt across much of the Northeast on Monday into Tuesday as rising temperatures will be accompanied by up to one inch of rainfall in areas where a heavy thaw of snow and ice will begin to thaw and increase the risk of flooding.

Accuweather reports the heavy rainfall will cover a region from the Carolinas in the South to New England where streams and rivers have already risen to higher levels than appear on average.

Early next week, temperatures will rise to the 50s and 60s for most in the East while the West will see a small cooldown with the Pacific Northwest expecting rain through the majority of the week and temperatures in the mid 40s; as far south as Southern California the temperature is expected to dip into the 50s and 60s for much of the week after last week saw rising temperatures reach the 70s and 80s in Los Angeles and the surrounding areas.

The low pressure moving into the West at the start of the week will move across the nation with snow and freezing temperatures once again expected for the Midwest and rain in the South by Thursday of next week.
monster beats by dr. dre studio headphones Winter Storm Jaxon Brings Snow to the Midwest And Northeast

beats by dre headphone cable Winter 2014 ISU

what are the best beats by dre headphones Winter 2014 ISU

Here is a copy for you so you may access it at any time. If you have any questions, feel free to ask me any time. Faieta Name: _________________ This is your culminating task. This task may be done individually or with one partner. In this unit you will study and compare the life of Jesus Christ to that of a hero/protagonist (main character) in a movie. In a comparative essay, you must argue either the similarities or differences between the objects being compared. In this assignment you must choose a Disney movie hero/protagonist (either cartoon, CGI, or live action) and compare their SIMILARITIES to Jesus Christ. This means you are to pick a movie, watch it a few times, take notes, and compare them to Jesus. SOME questions you want to ask yourself during your viewing are: How is the hero like Jesus? What traits or characteristics does the hero possess that resembles traits of Jesus? How viewed by other characters in the film? Are they viewed as Jesus was viewed by his disciples? Is the hero challenged like Jesus was? How? Why? How does the hero overcome this/these challenge(s)? Does the hero sacrifice? How? Why? If something is sacrificed, what is it? Does the hero suffer? How? Why?In order to make a great comparison, you need to understand who Jesus was as well. During the course of the semester, we will learn the person of Jesus Christ, how he interacted with people, and who he was as a person and as the Son of God. However, to get a “head start”, you might want to research the life of Jesus to grasp a better understand of how to compare him to your movie hero. Stages of ISU:Thesis Statement (Monday, April 7, 2014) (5 marks)Essay Outline (Monday, April 21, 2014) (15 marks)First Draft (Tuesday, May 20, 2014) (20 marks)Final Draft (Monday,
beats by dre headphone cable Winter 2014 ISU
June 2, 2014) (40 marks)Presentation (Week of Monday, June 2, 2014) (20 marks)The thesis statement is the statement in which your essay is centred upon. It is the main idea of your essay. You must have between 2 4 points in your thesis that will be the basis of your main arguments.Ex: In the Disney movie, Hercules, Hercules demonstrates many similar qualities to that of Jesus Christ. Some of the most notable similarities are: being the son of the King of the Greek Gods, Zeus; Hercules is challenged by a powerful being, Hades, much like Jesus was challenged by Lucifer; and the destiny of Hercules is to become immortal and join his father’s side on Mt. Any essay that is shorter or longer will result in a deduction of marks, pending on how much shorter or longer the essay is. A copy of a blank outline will be provided and you are to fill out the information before handing in your outline for marking. Your essay must be double spaced, Times New Roman font, 12 point font, and 500 750 words. to cite all work that is not yours (use quotations from books, film, magazines, journals, etc.; and cite your work as to where your information is from). You may use the TV to show certain clips to the class to explain your points. Your presentation must not be longer than 10 minutes. You will explain to the class what film you used, the character that is being compared to Jesus,
beats by dre headphone cable Winter 2014 ISU
and your supporting points. You should illustrate to the class how your character is similar to Jesus either through art or film.

free dre beats headphones Winston choosing Beats over league

red dre beats headphones Winston choosing Beats over league

As NFL players, all are permitted to have endorsement contracts with Beats and other companies that aren’t league sponsors, but the league has cracked down on players in the past for wearing the competition’s headphones.

San Francisco 49ers quarterback Colin Kaepernick, who has an endorsement deal with Beats, said he was fined $10,000 by the NFL for wearing a pink pair for breast cancer awareness at a press conference in October. He covered the logo up with tape at a later appearance.

Brian McCarthy, an NFL spokesman, said the league’s restriction on public display of Beats or the items of other non sponsors applies only to post game interviews.

“Players are aware of the policy. It’s reiterated throughout the year, at the beginning of the season, and that’s nothing new,” he said.

Beats by Dre was acquired by Apple Inc. last year. A month later, the NFL reached the agreement with Bose to become the league’s official headphones.
free dre beats headphones Winston choosing Beats over league

dr dre beats headphone wins record bad beat poker jackpot

the beats headphone wins record bad beat poker jackpot

History while playing poker at Motor City Casino on Tuesday.(Photo: Provided)

What happens when you have a once in a lifetime experience twice in one night?

Well, if you are Battle Creek’s Kenny Tallent, you become $213,712 richer and you have a story to tell that many people would take bets on, saying it can’t be true.

Tallent was on his way to Detroit to play poker at the Motor City Casino. Driving on I 94, past FireKeepers Casino near Battle Creek, Tallent saw a flash in the sky that “made his heart drop.” By the time he reached Detroit, he had learned from friends and news reports that he had seen the meteor that fell in Michigan last Tuesday obviously, an experience he had never had before.

“I remember thinking, what are the odds of that. Maybe it would be good luck,” Tallent said.

Little did he knowthat he was about to beat the odds again.

Playing Texas Hold ’em poker, Tallent came up with four queens. His four of a kind was good enough to beat a similar hand at the table as a man from Oxford, Michigan,had four 3s.

One four of a kind beating another four of a kindis known as a bad beat in poker rooms. Atthe Motor City Casino, the loser in that scenario actually turns out to be a winner by getting the ‘bad beat’ jackpot. The jackpot, which comes from money pulled from every hand of poker played at the casino,had grown to a record $1,068,590.80. History while playing poker at Motor City Casino. history. The player with the losing hand in the bad beat gets 40 percent of the jackpot $427,452.52.

“That kind of bad beat, with the kind of jackpot they have at Motor City, is kind of rare. I guess I hope it’s not a once in a lifetime thingbecause I’d love to have it happen to me again, but it is rare,” Tallent said. “Seeing a meteor is pretty rare, too, I would think. Actually, playing as much poker as I do, I guess seeing a meteor is probably more rare.”

Tallent, a 2007 graduate of Lakeview High School anda tables dealer at FireKeepers Casino, was actually going to the Motor City Casino because of the outside chance of something like this happening.

“The news of that bad beat jackpot was getting so high, it was drawing a lot of players. There has been a lot of money in the poker room there lately because of that. Plus, it’s probably the best poker room in the state. They take really good care of their players there,” Tallent said. “But I never thought, in a million years, I would be a part of it. Still can’t believe it.”

Tallent hopes to take part of his winnings and play in the World Series of Poker this year in Las Vegas, “always watched it on TV and it has always been a dream of mine,”he said.

As for the actual hand, Tallent won that with the four queens, but the pot was much smaller than the bad beat jackpot, “I won the pot, but I guess I wished I was the one losing this timebecause the guywith four 3’s took home more money with the jackpot. But I’m not complaining,” he said.

Tallent had pocket queens and the flop came up 3 3 queen, so he already knew he had a good hand with afull house. When the fourth queen came on the turn, he knew, mathematically, he had the best hand.

“It never even crossed mymind that he could have four of a kind. But then I went all in and when he called my all in so quickly, I figured out he might also have four of a kind,” Tallent said. “We then looked at each other and I said, ‘you got it?”’ and he said, ‘you got it?’ and we both said yes. We realized what had happened and we all just started jumping up and down. Everybody in the poker room figured out what had happened and gathered around, there was this buzz everywhere.
dr dre beats headphone wins record bad beat poker jackpot

beats by dr dre monster headphones winner lifts Manton

lil wayne beats headphones winner lifts Manton

PETOSKEY Breslin was calling. Manton answered.

With a shoulder shimmy on the left wing, an explosive drive to the elbow and a picture perfect pull up jumper over the defense, Jayden Perry hit the game winning shot in overtime to beat Negaunne 51 49 and send the Rangers to the Class C state semifinals and Michigan State’s Breslin Center.

“I like taking jump shots. That’s my shot, and I practice that all the time,” Perry said. “I knew as soon as I jumped. I knew it was going in. I could feel it.”

Manton head coach Ryan Hiller said Perry’s shot embodies the work the junior has put in since his freshman year when he had the ball in his hands during the closing moments of a loss to rival McBain.

“It was emotional for him, but he built on that,” Hill said. “I knew Perry was taking the (winning) shot. He works so hard. He’s the hardest worker out of anybody I’ve ever coached.”

Manton’s student section the Ranger Rowdies roared, Hiller led the charge off the Manton Bench to celebrate the shot and teammate Hunter Ruell lifted Perry off the floor.

Only the game wasn’t over.

Officials ruled Negaunee had called a timeout immediately following the basket and placed two seconds back on the clock, which had erroneously expired amid the celebration.

Manton remained calm through a series of consecutive timeouts by both teams and forced a heavily contested last second shot for Negaunee that failed to hit rim.

“Everyone was jumping around and we were all happy,” Perry said. “They put the two seconds back on, and I thought we did a great job regrouping and finishing it out.”

Manton’s victory marks the Rangers’ first trip to the state semifinal round since 1996, when the Rangers led by then player Ryan Hiller reached the state championship game.

Hiller said reaching the Breslin Center as a coach tops his visit as a player.

“It’s more gratifying,
beats by dr dre monster headphones winner lifts Manton
” he said. “I have fond memories, but you don’t realize how much work you put in as a coach. Hours and hours and hours of preparing and all the decision making.”

Perhaps one of the biggest decisions of Tuesday’s game came in the closing seconds of regulation. Negaunee had the ball with 25.5 seconds remaining and the score tied at 42. The Miners were going to hold the ball for the last shot, but Hiller decided to have him team trap the ball handler. The move paid off as the Rangers forced a turnover and wound up with the final chance to win the game in regulation.

Hiller knew it was a gutsy decision because of what might happen if the trap didn’t work an easy Miner basket and a loss.

“You don’t want to let down your community,” he said. “You don’t want to let down your kids. They trust you.”

Manton got off to a quick start in overtime with a 3 pointer by Trever Salani on the Rangers’ first possession. The lead held until Negaunee’s Dre Tuominen made a twisting layup he shot facing away from the basket to tie the game at 49.

Perry’s winner made the tremendous bucket moot.

“I’m having trouble with words,” Salani said after the game.

Ruell filled them in: “Best feeling ever.”

Ruell and Salani led the Rangers with 14 points apiece, while Perry scored 13. The trio were the only three players to score in the overtime session for Manton.

Treh Helsel added six points, and Darius Potter contributed solid production off the bench with four points.

The Rangers had yet another great night at the free throw line, converting 9 of 11 shots.

Manton practiced various zone defenses all week to try to stop Negaunee’s two headed monster of Tuominen and Trent Bell.

They played man to man exclusively after Jacob Ennett hit three three pointers in the second quarter.

“He was the guy we were gonna let beat us, and he was having a good night,” Hiller said. “You have to switch your game plan.”

Ennett finished with nine points, Tuominen scored 12 and Bell led all scorers with 22, including 10 of 11 at the charity stripe and several easy buckets via offensive rebounds.
beats by dr dre monster headphones winner lifts Manton

beats by dr. dre solo headphones with controltalk – black Wind Turbine Components Require Larger HBM

bose or beats headphones Wind Turbine Components Require Larger HBM

Michael Jacobsen, Owner, Nordmark Maskinfabrik A/S, with the large wind turbine hub after machining and painting. The headstock can travel 8 meters (26.2 ft.) on the column.

Nordmark Maskinfabrik A/S, Saeby, Denmark, was in need of a machine to manufacture large components for its energy customers. “I anticipate that wind energy is moving toward more offshore wind energy fields which require larger six, eight or even 10 Megawatt wind turbines, larger than land based wind energy fields which require 5 or 7 Megawatt wind turbines. We need Nordmark to be prepared to meet our wind energy customers’ needs for larger wind mill hubs and bases,” said Michael Jacobsen, Owner of Nordmark. This would require a very large horizontal boring mill that Jacobsen did not find available on the machine tool market.

Nordmark Maskinfabrik A/S has three plants in Denmark focusing 85% of its machining time on wind turbine components. The company machines 500 hubs per year, producing 50 to 60 tons of metalworking chips in a week. tons) and measuring up to 105′ x 16.4′ x 6.5′, have an initial value of $28,000 $78,000.

“We discussed with Fermat Group A/S of the our need to be ready for this larger wind turbine market,” explained Jacobsen. Nordmark currently runs seven Fermat horizontal boring mills in its plants. “Because of our good success with our seven Fermat HBMs and having a good working relationship with Fermat, we discussed with them the development of a new larger horizontal boring mill with the milling and drilling capacity for the large wind turbine hubs. tons) of weight, a ram to extend both the head and spindle out to reach all areas of the large components and a robotic tool changer. The robotic tool changer frees up the area around the headstock while allowing for storage of many more tools,” said Jacobsen. tons). The longitudinal travel in the X axis stretches up to 28,100 mm (92.19 ft.) and vertical movement of the spindle in the Y axis is 8,000 mm (26.25 ft.). The HBM is designed with a double column for stability rather than using a single column with a counter weight. As the headstock moves up and down the column it utilizes four servomotors. The headstock is a ram type allowing for extension of the spindle to reach all parts of large components. The columns move along the bed on four separate rolling guideways (optional hydrostatic guideways). As the headstock moves in the vertical direction, four linear optoelectronic position sensors provide feedback to the control for accurate positioning. The movement of the columns is provided by two motors with two gears and pinions and a rack positioned on the bed. The position of the columns is measured by an optical linear position sensor.

On the new WRF 160 Heavy / z 1600 the tilting rotary table is controlled by the Heidenhain control system. The rotary encoder at the center of the rotary table allows for automatic positioning of the table in increments of 0.001 The automatic head can change positions while still spinning in order to continue machining as soon as possible. Right angle and universal heads are available for the machine and are to be included with the Nordmark machines. From a pickup station the machine will store, pick up and automatically change the heads. An automatic chip conveyor carries chips away from the machines. The new machines will have up to 18 axes due to the multiple servomotors on each axis.

Two Fermat WRF 160 Heavy / z 1600s are being manufactured for Nordmark. Each machine will include a Robotic Tool Changer consisting of a KUKA robot with 105 tool positions running on a five year battery all protected by a safety barrier. The machine column moves toward the robot and the robot arm moves to the spindle and replaces the tool. “This may seem counter productive but in the long run allows for much more flexibility. The standard automatic tool changer is close to the moving column, sometimes restricting areas around the machine. The robotic tool changer frees up this area for large bulky components,
beats by dr. dre solo headphones with controltalk - black Wind Turbine Components Require Larger HBM
” explained Jacobsen. “The tools on the robotic tool changer rack stay clean, well organized and allow for presetting to be done offline utilizing a small computer chip in the tool. Redundant tools can be placed on the rack so that if one tool is broken or becomes worn a new one is ready to use. In the case of a regular on board toolchanger, the machine will look to see if the tool is on the rack and shut down if it cannot find the tool,” said Jacobsen. The machine will have through tool coolant capabilities. One of the tool positions will hold a Heidenhain probe for alignment, for finding the starting point, for high tolerance positioning for drilling holes and for other in process gauging for quality control purposes.

After the two new WRF 160 Heavy / z 1600s are assembled by Fermat in Brno, , they will be tested in multiple ways. The components and assemblies such as the headstock are tested before they are assembled into the machines. Then, when the machines are ready to ship, they will be disassembled and packed for shipment to Denmark. Nordmark is preparing a new building for the two machines. The cement floor is 3 meters deep (9.84 ft.) to support the weight of the heavy machines. The foundation will be fitted with 530 foundation bolts to hold the machines. After the machines arrive in Denmark, they will take eight to ten weeks to reassemble.

Nordmark, with a total of 120 employees, machines the wind turbine’s hub, base plate and other large components. The company also does shaft rebuilding. tons). Large cranes carry the casting provided by Siemens Energy, Vestas or Nordex to the machine tables. Nordmark’s customers send a CAD drawing that goes direct to the Heidenhain control on the machines.

The fixtures that hold the castings are custom made by Nordmark. Most of the machining is done on Fermat HBMs. Drilling of holes is done from angles using a right angle head or universal head. A tilting headstock on some of the machines also allows milling and drilling on angles. Five years ago Nordmark purchased its first Fermat HBM with a tilting headstock. The Fermat HBMs currently on the shop floor at Nordmark have 4.5 meter (14.76 ft.) up to 7.3 meter (24 ft.) columns to accommodate large hubs. The new machines will have an 8 meter (26.2 ft.) column height. It takes 72 hours to complete the machining of a hub utilizing a rotary table, an automatic right angle head and a universal head.

After the hub is milled and drilled, it is moved to another location on a trolley. The trolley moves the large hub to the paint booth, places it on a rack and then moves back out of the way. The surface is cleaned with water, sandblasted, painted and the outer surface is coated with sand to create high friction to facilitate moving the hub into place later. The hub is then wrapped in plastic to keep it dry.

Another large wind turbine component that is 7.5 meters (24.6 ft.) in diameter was being machined on the inside diameter. A ram on the Fermat HBM extended the spindle to reach all parts of the component. Due to weldments that could cause pressure build up and cause the component to lose roundness, machining was performed from opposing sides one after the other to retain the roundness of the large wind turbine component.

“Nordmark places emphasis on quality control at all phases of the machining and finishing process,” said Jacobsen. “Currently Nordmark utilizes M probes for in process gauging for quality control. The new machines will have Heidenhain probes. A Faro Laser Tracker quickly measures large parts for quality control. Nordmark is able to produce components on the Fermat HBMs with 50 micron tolerance.”

“Our Fermat HBMs have proved to be productive. Nordmark runs three shifts a day, seven days a week. Fermat’s service department is always available and will ship replacement parts even on the weekend so we can get our machines back to cutting chips. Because Fermat uses less parts in its machines and uses well known components such as servomotors, these types of replacement parts are readily available. Internet diagnostics are also available from Fermat. Fermat’s training was all done on site for our convenience. We look forward to receiving our new large Fermat HBMs and to being prepared for the wind energy market’s requirements for ever larger wind turbine hubs and components,
beats by dr. dre solo headphones with controltalk - black Wind Turbine Components Require Larger HBM
” said Jacobsen.

beats by dre headphones prices win curling bronze after rare tumble

beats by dr dre headphones studio win curling bronze after rare tumble

Russian atheletes Anastasia Bryzgalova,left, and Aleksandr Krushelnitckii check their shoes before the start of their mixed doubles curling match against Norway at the 2018 Winter Olympics in Gangneung, South Korea, Tuesday, Feb. 13, 2018. The. Russian atheletes Anastasia Bryzgalova,left, and Aleksandr Krushelnitckii check their shoes before the start of their mixed doubles curling match against Norway at the 2018 Winter Olympics in Gangneung, South Korea, Tuesday, Feb. 13, 2018. The.

By KRISTEN GELINEAU, Associated Press GANGNEUNG, South Korea (AP) Despite a highly unusual tumble on the ice, a team of Russian athletes roared back to win the bronze medal in mixed doubles curling by beating Norway 8 4 on Tuesday.

A tearful Anastasia Bryzgalova leaped into her coach’s arms after her team’s victory, which earned the Russians the first Olympic medal in mixed doubles curling. The game, which is a faster, more energetic offshoot of standard single gender curling, is making its Olympic debut at the Pyeongchang Games.

Both the Russians and Norwegian teams are couples; Bryzgalova is married to teammate Aleksandr Krushelnitckii,
beats by dre headphones prices win curling bronze after rare tumble
and Norway’s Kristin Skaslien is dating teammate Magnus Nedregotten. Bryzgalova said she and her husband drew strength from their relationship, particularly after a tough loss to Switzerland on Monday.

”It’s very important that we are family,” she said through a translator. ”That was very important to survive yesterday’s loss just to come out here today and to make the match that we can be proud about. The fact that we are family helped us a lot.”

The most dramatic moment of the game came in the third end, or round. Bryzgalova was shuffling backward while strategizing with Krushelnitckii when she stumbled over a stone she didn’t realize was behind her. For a second, it seemed as if she would recover her footing, but seconds later, her legs went flying out from under her and she crashed hard onto her backside.

It is very rare for a curler to fall in professional curling, and the spill drew gasps from the stunned crowd.

Curlers wear special shoes to help them maneuver across the ice. On one foot, they wear what’s known as a ”gripper,” which has a rubbery bottom that helps them grip the ice. The other shoe is known as a ”slider” it has a very slippery Teflon sole that helps the curlers glide.

After looking momentarily stunned, Bryzgalova stood up and gave a sheepish smile. Her coach said she was not hurt in the fall, and she laughed off the embarrassing moment after the match.

”It was very simple I forgot about the stone that was behind me,” she said.

The Norwegians were trailing from the start, after the Russian duo managed two points in the first end. Norway drew close in the fifth after a takeout shot that gave them two points to bring the score to 5 4, with Russia in the lead. But the Norwegians missed an opportunity to add points in the seventh, when they had the advantage of throwing the final rock. They delivered the stone too hard and it glided past the target, giving the Russians a one point steal to bring the score to 7 4. Russia added one point in the final end to clinch the win.

”We always ended up chasing the Russians almost every end, so we struggled out there and the Russians had a very good game,” Skaslien said. ”Fourth place is not bad at all and we’re happy with our performance throughout the week.”

Skaslien said experiencing the Olympics with her boyfriend had been a big adventure. And despite the stress of being on the world stage, she said, their relationship has remained solid.
beats by dre headphones prices win curling bronze after rare tumble

best beats headphones to buy Will transgender people be denied chance to serve in the military

dr dre beats headphones on sale Will transgender people be denied chance to serve in the military

Anastasia Rathbun knew she wanted to be in the Army from the timeshe was six years old.

“I always thought it was very cool,” said Rathbun, who lives in Battle Creek. “I wanted to be part of something bigger.”

When she was six, Rathbun went by the name Andrew. She said she’s known she isa woman her whole life. She realized her dream of being a soldier in 2009.

The opportunity for people who, like Rathbun,are transgender,to serve in the military is being called into question. And they have something to say about it. Military. Our military must be focused on decisive and overwhelming victory and cannot be burdened with the tremendous medical costs and disruption that transgender in the military would entail.”

This not only caught the Pentagon off guard when it was announced, but it was also a surprise to transgender people who served in the military previously.

Rathbun, who enlisted as Andrew Rathbun,served in the Army from 2009 to 2011 as a member of the Second Stryker Cavalry Regiment, stationed in Germany.

In 2010, she was an infantry mortarman and was sent to combat in Kandahar, Afghanistan.

Rathbun, a Jonesville native, credits the Army with giving her the confidence to come out, but not until after her service.

“I knew before I served that I wanted to transition,” Rathbun said. “When I was in, you couldn’t be openly bi or anything so I kept it super discrete. There are a lot of curious or LGBT friendly service members, but they all are super discrete about it.”

After Rathbun publicly identified herself as a woman in 2012, she heard from some former comrades.

“I got a Snapchat from some of my platoon members a few months ago, and they were actually cool with me,” Rathbun said. “That was surprising.”

On Facebook, Rathbun posted her thoughts about Trump’s proposed ban because, she said, she was getting so many questions about it.

“When it comes to the disruption effect it would have that can be solved in tons of ways like teaching the service members to have an open mind, having more LGBT friendly units, or just treating the ‘disruption’it causes as any other case of similar circumstances,” Rathbun wrote.

Rathbun said she expectsthe cost for hormone treatments to be around $100 a month for the relatively small number of soldiers who would need them. 21 to figure out a plan to implement the ban. Senators John McCain of Arizona and Susan Collins of Maine, and Democratic SenatorsKirsten Gillibrand of New York and Jack Reed of Rhode Island have, according to a Sept. 15 news release from Gillibrand, introduced a bill that would stop the Department of Defense from discharging current members of the military because of their gender identity.

“When less than one percent of Americans are volunteering to join the military, we should welcome all those who are willing and able to serve our country,”McCain said in the release.

The Pentagon on Sept. 15 confirmed to reporters that transgender members who leave the service before the ban goes into effect can re enlist during that time and current members will continue to receive medical treatment.

Several organizations have filed lawsuits against the ban, such as the American Civil Liberties Union, OutServe Servicemembers Legal Defense Network and civil rights law group Lambda Legal.

The makeup of the armed forces has changed over the years. President Harry Truman desegregated the services in 1948.

President Bill Clinton made “don’t ask, don’t tell” into law, which punished those who publicly identified as gay or bisexual with discharge from the military, but also took steps to protect them from harassment.

That law ended in 2011 under President Barack Obama, and gay and bisexual people can openly serve. Transgender people can as well, unless the Trump ban takes effect.

“This form of blatant discrimination will not be tolerated by our community and Battle Creek Pride will continue to fight for the rights of our transgender family,” Battle Creek Pride President DeanaSpencer said. “They do not deserve this kind of treatment simply because of who they are.”

Battle Creek Pride provides resources for LGBTQ individuals and allies, as well as holding meetings, support groups and gatherings such as movie nights.

Veterans who need such resources can also turn to the Battle Creek VA Medical Center.

The Battle Creek VAwas one of two hospitals in Michigan this year to be named by the Human Rights Campaign as aLeader inLGBTQHealthcare Equality. The facility hosts an LGBTQsupport group.
best beats headphones to buy Will transgender people be denied chance to serve in the military

reviews for beats headphones Will Smith Joel Edgerton On Stage

how much are beat headphones Will Smith Joel Edgerton On Stage

Netflix will release an absolute monster of a film in cinemas later this year. Bright is directed by David Ayer and sees Will Smith star alongside Joel Edgerton in a futuristic crime movie debuting on the streamer in December. The film had a big presence at the San Diego Comic Con on Thursday where Will Smith and co. turned up to celebrate the movie. We have a brand new Bright trailer along with highlights from the Bright Comic Con panel below. Ward, a human (Will Smith), and Jakoby, an orc (Joel Edgerton), embark on a routine night patrol that will alter the future of their world as they know it. Battling both their own personal differences as well as an onslaught of enemies, they must work together to protect a young female elf and a thought to be forgotten relic, which in the wrong hands could destroy everything.

Related:Bright first look images show off David Ayer’s sci fi actioner with Will Smith

The Netflix original film stars Will Smith, Joel Edgerton, Noomi Rapace, Lucy Fry, Edgar Ramirez, Ike Barinholtz, Enrique Murciano, Jay Hernandez, Andrea Navedo, Veronica Ngo, Alex Meraz, Margaret Cho, Brad William Henke, Dawn Olivieri, and Kenneth Choi. The film is directed by David Ayer and written by Max Landis. David Ayer, Eric Newman, and Bryan Unkeless serve as producers.

Brightarrives on Netflix in December 2017. Watch the Bright Comic Con panel highlights in the payer below. We also have some images from the event for your viewing pleasure. There is also that brand new trailer too.
reviews for beats headphones Will Smith Joel Edgerton On Stage

custom beats by dre headphones will play Czechs in Olympic quarters

beats headphones discount will play Czechs in Olympic quarters

Ryan Donato (16), of the United States, falls as he battles for the puck with Dominik Granak (51), of Slovakia, during the first period of the qualification round of the men’s hockey game at the 2018 Winter Olympics in Gangneung, South Korea,. Ryan Donato (16), of the United States, falls as he battles for the puck with Dominik Granak (51), of Slovakia, during the first period of the qualification round of the men’s hockey game at the 2018 Winter Olympics in Gangneung, South Korea,. James Wisniewski, Mark Arcobello and Garrett Roe also scored for the Americans, who took advantage of a 5 on 3 power play for hits on Donato and goaltender Ryan Zapolski.

Shaking off a collision with Ladislav Nagy, Ryan Zapolski had arguably his best game of the tournament, stopping 21 of the 22 shots he faced. also beat Slovakia 2 1 in the preliminary round when Donato scored twice. at the 1992 Games in Albertville.

Slovakia goaltender Jan Laco allowed five goals on 33 shots and Peter Ceresnak scored a power play goal for Slovakia, which became the first team eliminated from the men’s side. wasted little time getting on the board early in the second. Terry, as he has done all Olympics, used his speed to get to the net, and Donato picked up the loose puck and beat Laco 1:36 into the period.

The Americans got not one but two scares 26 seconds later when Nagy ran over Zapolski and Slovakia defenseman Michal Cajovsky put a shoulder into Donato’s head in the neutral zone. Trainers attended to Donato and Zapolski as backup goaltender Brandon Maxwell stretched and prepared to go in.

Donato got stitched up on the bench and Zapolski took a few minutes before deciding not to leave the net. The ’90s hit ”Tubthumping” by Chumbawamba blared over the speakers when both players got to their feet and provided a fitting soundtrack for the next few minutes.

After Jordan Greenway was penalized for slashing, Slovakia scored on the power play 16:54 into the second to cut it to 3 1, but the lightning fast line of Roe, Brian O’Neill and Broc Little combined for a tic tac toe goal to make it 4 1 at 9:52 of the third. O’Neill flashed his speed down the right wing, took a hit while making the pass to Little who found Roe for a tap in.

NOTES: St. Cloud State defenseman Will Borgen was a healthy scratch again for the United States. . Veteran forward Jim Slater returned to the lineup, replacing Chad Kolarik. . Former NHL player and coach Craig Ramsay coaches Slovakia.
custom beats by dre headphones will play Czechs in Olympic quarters